Custom Pins > Iron Stamped
Iron Stamped
Click for Larger Photo.
*Photographs for reference only and are not for re-sale.
|
This type of pin is usually used for larger quantities because of the
economic cost of iron. The process is the same as all other stamped pins,
except the base metal is iron. These pins are great for designs with little
detail.
What's Included
• Four colours of your choice • Your choice of plating(eg: gold, silver, etc.) • All pin design - our design experts will create your custom pin/keyring • Butterfly snap finding • Fast 30 day delivery • 15 delivery available (at 45%/unit) |
| Size | 300 | 500 | 1000 | 2000 | 5000 | Extra colour, two-tone/antique plating or doming |
| 1/2" | $1.13 | 0.82 | 0.65 | 0.58 | 0.49 | $0.05 |
| 3/4" | 1.22 | 0.93 | 0.71 | 0.64 | 0.58 | 0.05 |
| 7/8" | 1.35 | 1.00 | 0.78 | 0.69 | 0.60 | 0.05 |
| 1" | 1.49 | 1.13 | 0.85 | 0.78 | 0.65 | 0.10 |
| 1 1/4" | 1.69 | 1.31 | 1.00 | 0.96 | 0.80 | 0.10 |
| 5B1NET |
$125 die charge, any size, any product. Prices are in CDN funds. USA customers,
click here for currency converter.
Technical Specifications:
Process: Iron stamped with soft enamel
Material: Iron
Enamel: Up to four colours of soft enamel are included (additional colours available)
Thickness: Thickness varies depending on the size of design
Plating: Gold / Antique Gold / Silver / Antique Silver / Antique Nickel / Copper / Antique Copper / Brass / Antique Brass / Dyed Black
Doming coating: Optional. A clear "bubble" of paint on top of the pin
Attachment : Various, butterfly snap incl. (tie clips, safety pin, magnets etc. available too)
Colour reference: Pantone Colour Chart.
Process: Iron stamped with soft enamel
Material: Iron
Enamel: Up to four colours of soft enamel are included (additional colours available)
Thickness: Thickness varies depending on the size of design
Plating: Gold / Antique Gold / Silver / Antique Silver / Antique Nickel / Copper / Antique Copper / Brass / Antique Brass / Dyed Black
Doming coating: Optional. A clear "bubble" of paint on top of the pin
Attachment : Various, butterfly snap incl. (tie clips, safety pin, magnets etc. available too)
Colour reference: Pantone Colour Chart.
How these pins are made:
STEP 1 Stamping Molding
A steel die is carved from the black and white art. The pins are then stamped out. STEP 2 Outline Cutting
Cutting molds are made separately, then cut to the exact outline of the design. Additional outline cutting molds may be required depending on the complexity of the design. If a center hole or cut-out is required, an additional cut-through mold must be used. STEP 3 Attachment
Solder attachment onto the back of each piece. STEP 4 Plating
Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. STEP 5 Polishing
The metal surface is then polished until it is smooth and shiny. This applies to copper material only. Iron can be polished if required, but this will incur a surcharge. STEP 6 Colouring
Soft enamel is carefully inserted by hand, one colour at a time, using different sized syringes. Drying. To prevent defects, a high degree of skill is required in order to keep each colour and the correct amount of enamel in the proper area. The enamel paint is filled to the very top surface of the pin. STEP 7 Cleaning
Excess colour and impurities are then wiped and polished off the metal surfaces. STEP 8 Baking
The metal piece is baked at approximately 450F for 12 to 15 minutes. STEP 9 Epoxy Coating
Clear epoxy is then applied to the surface to protect the enamel from colour fading and cracking. ( Epoxy coating is optional and provided according to customer's requirements) STEP 10 Inspecti
STEP 1 Stamping Molding
A steel die is carved from the black and white art. The pins are then stamped out. STEP 2 Outline Cutting
Cutting molds are made separately, then cut to the exact outline of the design. Additional outline cutting molds may be required depending on the complexity of the design. If a center hole or cut-out is required, an additional cut-through mold must be used. STEP 3 Attachment
Solder attachment onto the back of each piece. STEP 4 Plating
Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. STEP 5 Polishing
The metal surface is then polished until it is smooth and shiny. This applies to copper material only. Iron can be polished if required, but this will incur a surcharge. STEP 6 Colouring
Soft enamel is carefully inserted by hand, one colour at a time, using different sized syringes. Drying. To prevent defects, a high degree of skill is required in order to keep each colour and the correct amount of enamel in the proper area. The enamel paint is filled to the very top surface of the pin. STEP 7 Cleaning
Excess colour and impurities are then wiped and polished off the metal surfaces. STEP 8 Baking
The metal piece is baked at approximately 450F for 12 to 15 minutes. STEP 9 Epoxy Coating
Clear epoxy is then applied to the surface to protect the enamel from colour fading and cracking. ( Epoxy coating is optional and provided according to customer's requirements) STEP 10 Inspecti